- 储存模量
- 储存系数
- 储能模量
- 存储模量
- storage: n. 1.贮藏(量)，存储(量)；(仓库)保管；库容量。 ...
- modulus: n. (pl. -li ) 【数、物】模数，模量；系数。 ...
- dynamic storage shear modulus: 动态剪切储能模量
- dynamic storage tensile modulus: 动态拉伸储能模量
- electrical storage modulus: 电储存模量
下载手机词典可随时随地查词查翻译
storage modulus中文什么意思
- 储存模量
- 储存系数
- 储能模量
- 存储模量
下载手机词典可随时随地查词查翻译
例句与用法
- The real part of the modulus is often called the storage modulus .
与应变同相的实数部分模量，通常称为储能模量。 - Standard test method for storage modulus calibration of dynamic mechanical analyzers
动态机械分析仪存储模数校正的标准试验方法 - The dynamic mechanical behavior of the polymer composites , dynamic storage modulus ( g ' dynamic loss modulus ( g " ) and loss tangents ( tans ) , have been studied in this paper . for different ceramic , the higher structure of the ceramic filler is , the high value of tan8 is
研究了压电陶瓷/聚合物复合体系的动态力学，发现压电陶瓷在聚合物中的分散状况和与聚合物间的相互作用，直接影响复合体系内耗( tan6 )和动态模量( g ， ， g ? )的大小。 - The paper focuses on the processing technique of wood flour - recycle polystyrene composite , and assesses the effects of wood flour contents , coupling agent contents and the rotate speeds of extruder on water uptake , tension strength , bending strength and dynamic mechanical properties . the results can be shown as follows : with the increasing of wood flour , composites gain higher water uptake but lower dynamic mechanical properties , the storage moduli ( e " ) and glass transition temperature ( tg ) decrease
较系统地研究了木粉含量、偶联剂添加量和双螺杆挤出机的螺杆转速等主要挤出工艺参数对复合材料的吸水性能、拉伸强度、弯曲强度、动态机械性质(存储模量e和损耗正切角tan )的影响规律，初步确定了适宜工艺条件，主要结论是： 1 )木粉含量的增加使得复合材料的吸水性能增加，动态机械性质下降。 - With 20 % coupling agent , composites with 40 % and 50 % wood - flour content gain better storage moduli ( e " ) than these without coupling agent , and composites with 40 % and 50 % wood powder content attain the increments in tension and bending strength of 10 % and 40 % respectively , the rotate speeds of extruder affect the mixing of wood powder , coupling agent and polystyrene
3 )双螺杆挤出机的转速影响着木粉偶联剂和聚苯乙烯的均匀混合程度。研究发现，双螺杆转速为40rpm时，复合材料性质好于其它转速。 4 )木粉含量为40 ，偶联剂含量为20的复合材料其力学强度(拉伸强度为40 . 22mpa ，弯曲强度为76 . 192mpa )和存储模量明显高于其他工艺条件的复合材料。